Forklift Training Programs Phoenix

Forklift Training Programs Phoenix - Are you searching for a job as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift check, fuel kinds and handling of fuels, and safe utilization of a lift truck. Hands-on, practical training helps participants in acquiring basic operational skills. Program content includes current regulations governing the use of forklifts. Our proven forklift programs are designed to offer training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

How to Safely Handle Loads

Do not raise or lower the fork whilst the forklift is moving. A load should not extend over the backrest due to the possibility of the load sliding back toward the operator. Check for overhead obstructions and ensure there is enough clearance before raising a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

When the load is raised the forklift would be less stable. Make certain that no pedestrians cross beneath the elevated fork. The operator must never leave the lift truck while the load is lifted.

The forks should be level when handling pallets, and high enough to extend all the way into and below the load. The width of the forks must provide even weight distribution.

Before unloading or loading the truck, set the brakes and chock the wheels. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks could be installed to support a semi-trailer which is not attached to a tractor. The height of the entrance door must clear the height of the forklift by a minimum of 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for long periods. The trucks interior must have adequate lighting and be obstruction free. Inspect the flooring of the forklift cab for holes. The installation of material which are non-slip on the floor would help prevent slipping. Clear whatever obstructions from dockplates and docks and ensure surfaces are not oily or wet.

Never tow or push other vehicles utilizing a forklift.

Click to Download the pdf